SFP 1.25G 850nm 550m Optical Transceiver DDM Module Optical
Description Inquire Now
Specifications
HW SFP-1.25G-SX Compatible 1000BASE-SX SFP Transceiver Module (MMF, 850nm, 550m, LC, DOM)
HW SFP-1.25G-SX compatible SFP transceiver supports up to 550m link lengths over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. Each SFP transceiver module is individually tested to be used on a series of HW switches, routers, servers, network interface card (NICs) etc. Featuring low power consumption, high speed, this easy to install, hot swappable 1G SFP transceiver is ideal for Internet Service Provider (ISP) Gigabit Ethernet communication links, Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks and other optical links.
Product Specification
| HW Compatible | SFP-1.25G-SX | Vendor Name | Linkopto |
| Form Factor | SFP | Max Data Rate | 1.25Gbps |
| Wavelength | 850nm | Max Cable Distance | 550m@50/125µm OM2 MMF 275m@62.5/125µm OM1 MMF 220m@62.5/125µm FDDI MMF |
| Connector | LC Duplex | Media | MMF |
| Transmitter Type | VCSEL | Receiver Type | PIN |
| DDM/DOM | Supported | Commercial Temperature Range | -5 to 70°C (23 to 158°F) |
| TX Power | -9.5 ~ - 3dBm | Receiver Sensitivity | < -17dBm |
| Typical Power Consumption | ≤0.8w | Receiver Overload | -3dBm |
| Bit Error Ratio (BER) | 1E-12 | Extinction Ratio | >9dB |
| EMC (Electro Magnetic Compatibility) | Supported | MTBF | 1,000,000 Hours |
| Protocols | IEEE 802.3z, SFF-8472, SFP MSA (INF-8074i) Compliant | Warranty | 5 Years |
Product Spotlights
High Performance
Wide Application
Protocols and Safety Standards
Previous：no
Next：no
